Alkaline degreaser Concentryl® ActiveFoamAlkaline degreaser for the foodstuffs sector. Active foam thoroughly removes all grease and oil from stainless steel, glass and other alkaline resistant surfaces.
Cleaning set for antistatic cleaningFor environmentally friendly cleaning of telephones, faxes, computers, screens, keyboards and other plastic casing. Includes 125 ml surface cleaner for antistatic cleaning of appliance surfaces and plastic casing, 125 ml screen cleanser with antistatic effect, 20 non-fluffing fleece wipes, 1 microfibre tissue, 2 telephone wipes, 1 fax wipe for cleaning document reader and rubber transport roller and 2 small cleaning rods and 1 spatula for small areas and...
Clear rinsing agentfor dishwashers, liquidLime removing, flow-foam clear rinsing agent containing citric acid. For all standard dishwashers. Also highly effective when machine is full with different ware, e.g. porcelain, plastic, metal. Dosage depends on water hardness: 0.5-0.8 ml/litre fresh water at 8° dH, 0.9-1.0 ml/litre fresh water from 9° dH., Density 0,9964
Cold cleaner for cold cleaning and removing greaseIdeal for cold cleaning and removing grease. Speedy, residue-free evaporation. Dissolves fat, oil, tar, wax, etc. Application: machine parts, electric motors, switches, relays, etc. Propellant: CO2., UN-No. 1950
Descaler, concentrate for removing lime depositsIdeal for removing lime deposits. Contents: Formic acid 83 %, inhibitors and colorants. Biodegradable. For use dissolve about 50 ml descaler in 1 l water., Density 1,23, UN-No. 3412
Dishwasher cleaner Intensive cleaner f. dishwashers, powderIntensive cleaning powder for all standard dishwashers. Even the most tenacious dirt can be removed and furring reduced. To be added directly to the washtub of the dishwasher either manually or placed in the dosing chamber. Dosage depends on water hardness: 1-2 g/litre fresh water to 8° dH, 2-3 g/litre fresh water from 9° dH. Identification marking: C R: 34-37 · S: 1/2-13-24/25-36/37/39-45 · WGK 1, Density 1,02, UN-No. 3262
KORASILON release agent M long-lasting release capacitySilicone-based mould release agent for duromers and thermoplastic materials. With high, long-lasting release capacity. Its extremely thin spray film is easy to apply and provides improved lubricity, surface gloss and scratch resistance.Heat resistant up to approx. 150 °C, leaves no residues on hot surfaces., UN-No. 1950
Label remover 1 l Etikettenablöser, rein pflanzlichPure vegetable. Dab on generously, allow to act, repeat if necessary, pull off label. Wipe off remaining glue with label remover. Dipentene , Density 0,84, Boilingp. 52 °C, Flashp. 178 °C, UN-No. 2319